The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
BORD
The BORD (BOaRD) tag is an 8-bit unsigned integer (uint8_t
) that contains the Board ID of the device that the firmware image is supposed to be ran on. It allows Apple to make sure you are not running another device's firmware files on an incompatible device, probably to prevent using old exploits. What is odd about this tag is that the same values have been used many times. It can be found in the BuildManifest.plist inside an IPSW next to ApBoardID
.
Devices
- Apple TV
- Apple Watch (1st generation)
- Apple Watch Series 1
- Apple Watch Series 2
- Apple Watch Series 3
- HomePod
- HomePod: 0x38
- iPad
- iPad mini
- iPhone
- iPhone: 0x00
- iPhone 3G: 0x04
- iPhone 3GS: 0x00
- iPhone 4
- iPhone 4S: 0x08
- iPhone 5
- iPhone 5c
- iPhone 5s
- iPhone 6: 0x06
- iPhone 6 Plus: 0x04
- iPhone 6s: 0x04
- iPhone 6s Plus: 0x06
- iPhone SE: 0x02
- iPhone 7
- iPhone 7 Plus
- iPhone 8
- iPhone10,1: 0x02
- iPhone10,4: 0x0A
- iPhone 8 Plus
- iPhone10,2: 0x04
- iPhone10,5: 0x0C
- iPhone X
- iPhone10,3: 0x06
- iPhone10,6: 0x0E
- iPod touch
- iPod touch: 0x02
- iPod touch (2nd generation): 0x00
- iPod touch (3rd generation): 0x02
- iPod touch (4th generation): 0x08
- iPod touch (5th generation): 0x00
- iPod touch (6th generation): 0x10
This firmware article is a "stub", an incomplete page. Please add more content to this article and remove this tag. |