Difference between revisions of "Decrypting Firmwares"

From The iPhone Wiki
Jump to: navigation, search
(1.1.x)
m (added link to blackbird)
 
(69 intermediate revisions by 19 users not shown)
Line 1: Line 1:
  +
iOS contains many layers of encryption. This page details how to remove the encryption wrapper around each file in the [[IPSW File Format|IPSW]] file. A decrypted ramdisk is required to ''obtain'' the key for the root filesystem, but not to simply decrypt it with an existing key.
==1.x==
 
If you want to decrypt 1.x iPhone ramdisk you must remove some trash from the beginning of them. You can do this in Terminal.app (on Mac OS X you can find them in /Applications/Utilities/).
 
   
  +
For more history, see [[Firmware Keys]].
Unzip firmware image (change extension .ipsw to .zip and double click on archive) and find restore ramdisk. In Terminal.app enter simple command:
 
   
  +
== Ramdisks ==
''dd if=restore_ramdisk.dmg of=restore_ramdisk.stripped.dmg bs=512 skip=4 count=37464 conv=sync''
 
  +
This section details the decryption of the ramdisks in an [[IPSW File Format|IPSW]] file. The listed console commands are applicable to the [[S5L File Formats#IMG2|IMG2]] or [[IMG3 File Format|IMG3]] files under <code>/Firmware</code> also.
   
  +
=== 1.0.x ===
Where '''restore_ramdisk.dmg''' is image of restore ramdisk (for example 1.0 iPhone firmware restore ramdisk is 694-5259-38.dmg), and '''restore_ramdisk.stripped.dmg''' is 'decrypted' image, that you can mount and explore from Finder.
 
  +
With the release of the [[M68AP|iPhone]], the [[IMG2 File Format|IMG2 files]] weren't encrypted. So, in order to use them, all you need to do is remove the 2048 byte (2&nbsp;KiB) [[8900 File Format|8900 header]] from the file. You can do this with either a hex editor, or open up a console and run <code>dd(1)</code><sup>[{{man|dd|1}}]</sup>:
  +
dd if=''input'' of=''output'' bs=512 skip=4 conv=sync
   
  +
Once the header has been stripped, you will be left with either an IMG2 file or a mountable [[wikipedia:Hierarchical File System|HFS filesystem]].
Note: If after mounting stripped ramdisk you see errors, ignore them.
 
   
==1.1.x==
+
=== 1.1.x - 2.0b3 ===
  +
With the release of the [[N45AP|iPod touch]], Apple added a layer of encryption around the [[IMG2 File Format|IMG2]]. The decryption key wasn't obscured however, and a simple analysis of [[iBoot]] by [[User:Zibri|Zibri]] revealed the [[AES Keys#Key 0x837|0x837 key]].
To decrypt the 1.1.x ramdisk, strip the first 0x800 bytes. I'm not proficient in dd, but the above command could be modified for this, or it could be done in a hex editor. Once that's complete, run this command:
 
   
  +
In order to decrypt them, you need to remove the 2048 byte (2&nbsp;KiB) [[8900 File Format|8900 header]] from, then decrypt the resulting file. You can do this with either a hex editor, or open up a console and run <code>dd(1)</code><sup>[{{man|dd|1}}]</sup>:
''openssl enc -d -in ramdisk.dmg -out de.dmg -aes-128-cbc -K 188458A6D15034DFE386F23B61D43774 -iv 0''
 
  +
dd if=''input'' of=''stripped'' bs=512 skip=4 conv=sync
   
  +
Once the header is stripped, you need to do the actual decryption. The ramdisk is encrypted using [[wikipedia:Advanced Encryption Standard|AES]]-128 with [[wikipedia:Block cipher mode of operation#Cipher Block Chaining (CBC)|cipher block chaining]] (CBC). The [[wikipedia:Key (cryptography)|key]] is the 0x837 key with no [[wikipedia:Initialization vector|IV]]. To decrypt, open up a console and run <code>openssl(1)</code><sup>[{{man|openssl|1}}]</sup>:
This uses the iPhone's GID key which was first leaked by Zibri and had its purpose revealed on Geohot's blog.
 
  +
openssl enc -d -in ''stripped'' -out ''output'' -aes-128-cbc -K 188458a6d15034dfe386f23b61d43774 -iv 0
   
  +
Once decrypted, you will be left with either an IMG2 file or a mountable [[wikipedia:Hierarchical File System|HFS filesystem]].
==2.x+==
 
The ramdisk on both 2.x and 3.x firmwares is a simple [http://www.theiphonewiki.com/wiki/index.php?title=IMG3_File_Format img3 file], that you can decrypt using [http://code.google.com/p/img3decrypt/ img3decrypt] or [http://github.com/planetbeing/xpwn/tree/master xpwntool]. You must download one of these utilities. For easier access, put them in '''/usr/local/bin'''
 
   
  +
=== 2.0b4 - 3.0b5 ===
In Terminal.app enter:
 
  +
With the fourth beta of 2.0, Apple introduced the [[IMG3 File Format|IMG3]] file format, replacing the broken [[IMG2]] file format. This format was soon reversed and [[img3decrypt]]<sup class="plainlinks">[[http://code.google.com/p/img3decrypt/ src]]</sup> was created by Steven Smith (@[http://twitter.com/stroughtonsmith stroughtonsmith]) on {{date|2008|08|21}}. His code was later implemented into [[xpwntool]]<sup class="plainlinks">[[http://github.com/planetbeing/xpwn/tree/master src]]</sup>. In order to decrypt an IMG3 file, open a console and run one of the commands depending on your program choice:
  +
img3decrypt e ''input'' ''output'' ''iv'' ''key''
  +
xpwntool ''input'' ''output'' -k ''key'' -iv ''iv''
  +
The IV and key for a specific firmware is available through the [[Firmware Keys]] page or from the <code>Info.plist</code> file underneath [[PwnageTool]]'s <code>/FirmwareBundles</code> folder.
   
  +
Once decrypted, you will be left with either a raw binary blob. If <code>''input''</code> was a ramdisk, <code>''output''</code> will be a mountable [[wikipedia:Hierarchical File System|HFS filesystem]].
''img3decrypt e restore_ramdisk.dmg restore_ramdisk_decrypted.dmg Ramdisk_IV Ramdisk_Key''
 
   
  +
=== 3.0 [[Golden Master|GM]]/3.0 ===
Where '''restore_ramdisk.dmg''' is image of restore ramdisk (for example 3.0 beta 1 iPhone GSM firmware restore ramdisk is 018-4793-1.dmg), and r'''estore_ramdisk_decrypted.dmg''' is decrypted image, that you can mount and explore from Finder. Ramdisk_IV and Ramdisk_Key is a decrypted keys that you can find in [http://www.theiphonewiki.com/wiki/index.php?title=VFDecrypt_Keys:_3.x vfdecrypt page] or in Info.plist from PwnageTool FirmwareBundles folder (when Dev Team include support for this firmware).
 
  +
OS X Snow Leopard introduced the HFS compressed disk image. With 3.0 (what beta?), Apple began using Snow Leopard to package the [[ramdisk]]s. This results in some zero sized files in the disk image if you don't use Snow Leopard or newer. A discussion on extracting those files is available on [[Talk:Decrypting Firmwares|the talk page]].
  +
  +
==== [[S5L8900]] ====
  +
<!-- This needs to be moved to a new page. Maybe [[Obtaining Decryption Keys]]? -->
  +
With the 3.0 Golden Master (7A341) and 3.0.1, Apple messed up and, instead of using the [[Application Processor|application processor]]-specific [[GID Key]], used a pseudo-GID of 5f650295e1fffc97ce77abd49dd955b3 to encrypt the [[KBAG]]. This makes obtaining the keys for this version dead simple. Once you have decrypted the KBAG, decryption using the keys in it is the same [[#2.0b4 - 3.0b5|as above]].
  +
  +
==== [[S5L8720]] ====
  +
Business as usual, but keys and IVs have to be decrypted on the device still, unlike with the new [[S5L8900]] [[KBAG]]s. Apple incorrectly assumed that by encrypting iBEC and iBSS they were being sly. They were not. You can decrypt those on a 2.2.1 aes setup no problem whatsoever.
  +
  +
==== [[S5L8920]] ====
  +
The [[N88AP|iPhone 3GS]] firmware files are interesting. They have two [[KBAG]]s, which use AES-256 instead of the [[S5L8900]] and [[S5L8720]] that are using AES-128 still. The first KBAG has an identifier in it's header indicating that it is to be decrypted with the [[GID Key]] on [[Application Processor|SoCs]] that have a CPFM of 03 (Production & Secure), and the second seems to be for decrypting with [[Application Processor|SoCs]] that have a CPFM of 01 or 00 (Development & Secure or Development & Insecure), as the CPFM seems to change which [[GID Key]] it uses. CPFMs of lower than 01 are normally prototypes in the DVT stage or lower. For those that don't know how AES256 works, this now means that the first 0x10 bytes are the IV, and the remaining 0x20 bytes (not 0x10 anymore!) are the key.
  +
  +
==== [[S5L8960]] and later ====
  +
With [[S5L8960]], Apple changed the file format to use [[IMG4 File Format|IMG4]] files instead of [[IMG3 File Format|IMG3]]. Decryption can be performed by running the following in a command line application (make sure you have the [https://github.com/xerub/img4lib img4lib]):
  +
  +
img4 -i INPUT -o OUTPUT -k ivkey
  +
  +
INPUT is the file you want to decrypt, OUTPUT is the file you want to output once decrypted and ivkey is the IV and Key together for the file you are trying to decrypt.
  +
  +
== SEP ==
  +
This section details the decryption of the [[Secure Enclave Processor]] in an [[IPSW File Format|IPSW]] file. The listed console commands are applicable to the [[IMG4 File Format#IMG4_Payload|IM4P]] files under <code>/Firmware/all_flash</code>.
  +
  +
With the release of [[checkra1n]] 0.12.0, pongoOS has been updated to include [[Pangu]]'s project [[blackbird Exploit|blackbird]] which allows the exploitation of the [[Secure Enclave Processor]] to [[A10]] and [[A10X]] devices (for now, others will be supported in the future) from [[iOS]]/[[tvOS]] 12.0 - 14.2. To decrypt it, you'll need to enter pongoOS and insert the [[KBAG]]. This is done by compiling the <code>pongoterm</code> binary from the checkra1n project [https://github.com/checkra1n/pongoOS pongoOS] then execute a few commands in Terminal.
  +
  +
On macOS, if the checkra1n app is inside the <code>/Applications</code> folder:
  +
  +
<code>/Applications/checkra1n.app/Contents/MacOS/checkra1n -cp</code>
  +
  +
Alternatively, you could right-click the checkra1n.app and select "Show Package Contents" then navigate to <code>/Contents/MacOS/</code> and drag the checkra1n binary directly inside Terminal then adding <code>-cp</code> to the end.
  +
  +
Otherwise, with Linux you can install the latest via the [https://checkra.in/linux repository] then launching the checkra1n CLI:
  +
  +
<code>sudo checkra1n -cp</code>
  +
  +
Once done, use a USB to connect and place the device in [[DFU Mode]]. The process will begin with checkra1n running the device exploitation stages until a device boot is initiated. The Apple logo will show following the checkra1n logo shortly after along with some text on the screen. From here the user can execute the <code>pongoterm</code> command to enter the PongoOS shell.
  +
  +
Inside this shell you can type in <code>sep auto</code> which will start the [[Secure Enclave Processor]] exploitation process.
  +
  +
Then inserting the [[KBAG]] by typing in <code>sep decrypt [[KBAG]]</code>.
  +
  +
PongoOS will display the input [[KBAG]] from the [[IMG4 File Format#IMG4_Payload|IM4P]] file and output the decrypted [[wikipedia:Initialization vector|IV]] and [[wikipedia:Key (cryptography)|Key]].
  +
  +
  +
[[Category:Decryption]]

Latest revision as of 08:42, 7 February 2022

iOS contains many layers of encryption. This page details how to remove the encryption wrapper around each file in the IPSW file. A decrypted ramdisk is required to obtain the key for the root filesystem, but not to simply decrypt it with an existing key.

For more history, see Firmware Keys.

Ramdisks

This section details the decryption of the ramdisks in an IPSW file. The listed console commands are applicable to the IMG2 or IMG3 files under /Firmware also.

1.0.x

With the release of the iPhone, the IMG2 files weren't encrypted. So, in order to use them, all you need to do is remove the 2048 byte (2 KiB) 8900 header from the file. You can do this with either a hex editor, or open up a console and run dd(1)[man]:

dd if=input of=output bs=512 skip=4 conv=sync

Once the header has been stripped, you will be left with either an IMG2 file or a mountable HFS filesystem.

1.1.x - 2.0b3

With the release of the iPod touch, Apple added a layer of encryption around the IMG2. The decryption key wasn't obscured however, and a simple analysis of iBoot by Zibri revealed the 0x837 key.

In order to decrypt them, you need to remove the 2048 byte (2 KiB) 8900 header from, then decrypt the resulting file. You can do this with either a hex editor, or open up a console and run dd(1)[man]:

dd if=input of=stripped bs=512 skip=4 conv=sync

Once the header is stripped, you need to do the actual decryption. The ramdisk is encrypted using AES-128 with cipher block chaining (CBC). The key is the 0x837 key with no IV. To decrypt, open up a console and run openssl(1)[man]:

openssl enc -d -in stripped -out output -aes-128-cbc -K 188458a6d15034dfe386f23b61d43774 -iv 0

Once decrypted, you will be left with either an IMG2 file or a mountable HFS filesystem.

2.0b4 - 3.0b5

With the fourth beta of 2.0, Apple introduced the IMG3 file format, replacing the broken IMG2 file format. This format was soon reversed and img3decrypt[src] was created by Steven Smith (@stroughtonsmith) on 21 August 2008. His code was later implemented into xpwntool[src]. In order to decrypt an IMG3 file, open a console and run one of the commands depending on your program choice:

img3decrypt e input output iv key
xpwntool input output -k key -iv iv

The IV and key for a specific firmware is available through the Firmware Keys page or from the Info.plist file underneath PwnageTool's /FirmwareBundles folder.

Once decrypted, you will be left with either a raw binary blob. If input was a ramdisk, output will be a mountable HFS filesystem.

3.0 GM/3.0

OS X Snow Leopard introduced the HFS compressed disk image. With 3.0 (what beta?), Apple began using Snow Leopard to package the ramdisks. This results in some zero sized files in the disk image if you don't use Snow Leopard or newer. A discussion on extracting those files is available on the talk page.

S5L8900

With the 3.0 Golden Master (7A341) and 3.0.1, Apple messed up and, instead of using the application processor-specific GID Key, used a pseudo-GID of 5f650295e1fffc97ce77abd49dd955b3 to encrypt the KBAG. This makes obtaining the keys for this version dead simple. Once you have decrypted the KBAG, decryption using the keys in it is the same as above.

S5L8720

Business as usual, but keys and IVs have to be decrypted on the device still, unlike with the new S5L8900 KBAGs. Apple incorrectly assumed that by encrypting iBEC and iBSS they were being sly. They were not. You can decrypt those on a 2.2.1 aes setup no problem whatsoever.

S5L8920

The iPhone 3GS firmware files are interesting. They have two KBAGs, which use AES-256 instead of the S5L8900 and S5L8720 that are using AES-128 still. The first KBAG has an identifier in it's header indicating that it is to be decrypted with the GID Key on SoCs that have a CPFM of 03 (Production & Secure), and the second seems to be for decrypting with SoCs that have a CPFM of 01 or 00 (Development & Secure or Development & Insecure), as the CPFM seems to change which GID Key it uses. CPFMs of lower than 01 are normally prototypes in the DVT stage or lower. For those that don't know how AES256 works, this now means that the first 0x10 bytes are the IV, and the remaining 0x20 bytes (not 0x10 anymore!) are the key.

S5L8960 and later

With S5L8960, Apple changed the file format to use IMG4 files instead of IMG3. Decryption can be performed by running the following in a command line application (make sure you have the img4lib):

img4 -i INPUT -o OUTPUT -k ivkey

INPUT is the file you want to decrypt, OUTPUT is the file you want to output once decrypted and ivkey is the IV and Key together for the file you are trying to decrypt.

SEP

This section details the decryption of the Secure Enclave Processor in an IPSW file. The listed console commands are applicable to the IM4P files under /Firmware/all_flash.

With the release of checkra1n 0.12.0, pongoOS has been updated to include Pangu's project blackbird which allows the exploitation of the Secure Enclave Processor to A10 and A10X devices (for now, others will be supported in the future) from iOS/tvOS 12.0 - 14.2. To decrypt it, you'll need to enter pongoOS and insert the KBAG. This is done by compiling the pongoterm binary from the checkra1n project pongoOS then execute a few commands in Terminal.

On macOS, if the checkra1n app is inside the /Applications folder:

/Applications/checkra1n.app/Contents/MacOS/checkra1n -cp

Alternatively, you could right-click the checkra1n.app and select "Show Package Contents" then navigate to /Contents/MacOS/ and drag the checkra1n binary directly inside Terminal then adding -cp to the end.

Otherwise, with Linux you can install the latest via the repository then launching the checkra1n CLI:

sudo checkra1n -cp

Once done, use a USB to connect and place the device in DFU Mode. The process will begin with checkra1n running the device exploitation stages until a device boot is initiated. The Apple logo will show following the checkra1n logo shortly after along with some text on the screen. From here the user can execute the pongoterm command to enter the PongoOS shell.

Inside this shell you can type in sep auto which will start the Secure Enclave Processor exploitation process.

Then inserting the KBAG by typing in sep decrypt KBAG.

PongoOS will display the input KBAG from the IM4P file and output the decrypted IV and Key.