|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Phone.app codes
Like many other GSM phones, iPhone supports special codes that can be entered via keypad.
(The codes must be confirmed using the "
call" button.)
Standard GSM codes
| Code | Description |
|---|---|
| *#06# | Display IMEI |
iPhone proprietary, GSM models
| Code | Description |
|---|---|
| *3001#12345#* | Start the Field Test app (on iOS <> 4.0.x) |
The following codes support (some of) the standard GSM code prefixes:
*# - inquiry/check status ** - set value and activate * - reactivate # - "temporarily" deactivate ## - deactivate and clear settings
| Code | Description |
|---|---|
| 5005*'''VM'''# | Voicemail number (if not specified by the carrier bundle) |
| 5005*'''SMSC'''# | SMS Center number (stored on SIM card) |
| 5005*'''LANG'''# | set language(?)(not related to the interface language)(a prompt pops up asking for an ISO 639-1 language code) |
| 5005*'''CB'''# | enable cell broadcast messages |
| 5005*'''AANS'''# | enable / disable AutoAnswer on incoming calls. |
| 5005*'''PHONE'''# | display/set own number (if stored on SIM). Available in GUI form from Settings/Phone. |
| 5005*4433# | spinning wheel for about a second ??? |
| 5005*ART# | "Artemis?" |
| 5005*CORE# | CoreDump status (disabled by default) |
| 5005*MA# | MobileAnalyzer status (disabled by default) |
| 5005*MA255# | MobileAnalyzer (FullTrace?) status (disabled by default) |
| 5005*STATE# | Dump baseband logs ("Please add a description for this capture") |
| 5005*TRACE# | tracing? |
This code is carrier and/or device specific, but it's listed here for being of historical relevance as a part of a procedure capable of bypassing the Activation screen on iPhone OS 1.1.1: #301# through *#309# Generates fake incoming call; the phone will become kind of messed up, thinking that it's on a call until you restart. Can be used to stream music to Bluetooth headset.
iPhone proprietary, CDMA models
The following codes support (some of) the standard GSM code prefixes:
*# - inquiry/check status ** - set value and activate * - reactivate # - "temporarily" deactivate ## - deactivate and clear settings
| Code | Description |
|---|---|
| 5005*4357# | Display PRL and PRI version |
| 5005*'''AANS'''# | enable / disable AutoAnswer on incoming calls. |
| 5005*'''PHONE'''# | display (set?) MDN. |
| ##AKEY | Password: zeros -- Sets AKey |
| 5005*STATE# | Dump baseband logs ("Please add a description for this capture") |
