|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Search results
- ...ctive mode isn't accessed by sending characters to the baseband. Instead a GPIO pin is raised with a kernel call to preupdate reset.8 KB (737 words) - 19:18, 18 October 2019
- === GPIO Pins === ...zing the <code>GPIO_REQUEST_DFU1</code> and <code>GPIO_REQUEST_DFU2</code> GPIO pins (previously <code>HOLD_KEY</code> and <code>MENU_KEY</code>) correspon10 KB (1,674 words) - 16:14, 29 November 2022
- ...mand that loads an image from an address in memory after disabling all the GPIO devices. This is meant for loading [[Diags|diags]], so even unsigned images ...d jump to whatever address argv[1] specified, but not before disabling the GPIO devices. You can run unsigned code on the [[S5L8900]] using this, but the2 KB (306 words) - 06:22, 11 February 2021
- ...oot and spot the differences, as well as DeviceTree for any new hardware / GPIO addresses. On a plus side for the jailbreak, it would be much easier to hav14 KB (2,533 words) - 18:42, 28 May 2017
- /arm-io/gpio: 83000000:00001000 button_voldown = /arm-io/gpio['GPIO'](0x00001601, 0x00000000)20 KB (2,417 words) - 09:09, 13 October 2015
- <nowiki>#</nowiki> Configure I2S GPIO lines <---- here3 KB (520 words) - 11:23, 24 March 2017
- +--gpio: | | | +--compatible 25 bytes: gpio,t8015140 KB (10,764 words) - 02:43, 28 November 2017
- +--gpio: | | | +--compatible 25 bytes: gpio,t8020151 KB (11,716 words) - 11:31, 6 October 2018
- "bboff" use gpio single power donwn Baseband "bbon" use gpio single power on Baseband17 KB (2,559 words) - 01:30, 10 January 2023
