|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Difference between revisions of "Tutorial:Re-Provisioning iPhone 4 using file system (Incomplete)"
(→Setting UP) |
|||
| Line 8: | Line 8: | ||
---- |
---- |
||
| − | === Setting UP === |
+ | === Setting UP Windows === |
| + | 1. Download Tunnelier, WINSCP, or PUTTY. In this guide we will be using Tunnelier. |
||
| − | Reserved. |
||
| + | Download Tunnelier [http://www.bitvise.com/download-area Here] |
||
| + | 2. In order to connect via SSH you must have a Wi-Fi connection setup. Turn on your phone and your phone's Wi-Fi by going to Settings, Wi-Fi, and connect to your networks Wi-Fi connection. |
||
| + | <br>[[Image:Example.jpg]] |
||
| + | |||
| + | 3. In this example will connect to linksys. Once connected you will have the Wi-Fi icon in the status bar at the top. Click on the blue > icon to show details about the connection. Write down or remember the "IP Address". In this example mine is 192.168.1.103, yours might be similar. |
||
| + | <br>[[Image:Example.jpg]] |
||
| + | |||
| + | 4. Install Tunnelier and launch it. Setup your settings similar to this, remember to use your "IP Address" and not mine, this was just an example. See screen shoot. |
||
| + | Username: root |
||
| + | Password: alpine |
||
| + | <br>[[Image:Example.jpg]] |
||
| + | |||
| + | 5. Press the login button, and you will be presented with two new windows. A "Shell" window and an "Explorer" window. |
||
| + | <br>[[Image:Example.jpg]] |
||
| + | |||
| + | 6. You are now connected to the iPhone4 CDMA using Tunnelier and SSH. |
||
---- |
---- |
||
Revision as of 06:59, 25 February 2011
Prerequisites
You need:
- Jailbroken iPhone 4G CDMA with OpenSSH installed.
- SSH client.
- pList Editor
Setting UP Windows
1. Download Tunnelier, WINSCP, or PUTTY. In this guide we will be using Tunnelier.
Download Tunnelier Here
2. In order to connect via SSH you must have a Wi-Fi connection setup. Turn on your phone and your phone's Wi-Fi by going to Settings, Wi-Fi, and connect to your networks Wi-Fi connection.
File:Example.jpg
3. In this example will connect to linksys. Once connected you will have the Wi-Fi icon in the status bar at the top. Click on the blue > icon to show details about the connection. Write down or remember the "IP Address". In this example mine is 192.168.1.103, yours might be similar.
File:Example.jpg
4. Install Tunnelier and launch it. Setup your settings similar to this, remember to use your "IP Address" and not mine, this was just an example. See screen shoot.
Username: root
Password: alpine
File:Example.jpg
5. Press the login button, and you will be presented with two new windows. A "Shell" window and an "Explorer" window.
File:Example.jpg
6. You are now connected to the iPhone4 CDMA using Tunnelier and SSH.
Installation
Reserved..
