Difference between revisions of "PROD"

From The iPhone Wiki
Jump to: navigation, search
(New page: Denotes if the firmware image should be used on a production mode device or not. Obviously, this is set to 1 on all firmwares, while assumed to be set to 0 on debug / engineering devices.)
 
Line 1: Line 1:
 
Denotes if the firmware image should be used on a production mode device or not. Obviously, this is set to 1 on all firmwares, while assumed to be set to 0 on debug / engineering devices.
 
Denotes if the firmware image should be used on a production mode device or not. Obviously, this is set to 1 on all firmwares, while assumed to be set to 0 on debug / engineering devices.
  +
  +
Is also set to 0 on 3GS unspecialized firmwares(w/o ECID)

Revision as of 04:33, 12 August 2009

Denotes if the firmware image should be used on a production mode device or not. Obviously, this is set to 1 on all firmwares, while assumed to be set to 0 on debug / engineering devices.

Is also set to 0 on 3GS unspecialized firmwares(w/o ECID)