K66AP

This is the Apple TV 2G.

Introduction

The second-generation Apple TV, a digital media receiver made and sold by Apple Inc., was unveiled during an Apple press conference on September 1, 2010. It is a small form factor network appliance designed to play digital content originating from the iTunes Store, Netflix, YouTube, Flickr, MobileMe or any Mac OS X or Windows computer running iTunes onto an enhanced-definition or high-definition widescreen television, and will except music, video and photo streams from other iOS devices using Airplay in 4.2. The second generation sold 250,000 in it's first two weeks available.

Application Processor

It uses the S5L8930 application processor.

Wireless

The Apple TV uses the dual-band BCM4329 for Wi-Fi communications; it supports 802.11 a/b/g/n on both frequencies (2.4 GHz and 5 GHz).

Other Hardware

• Samsung K9LCG08U1M 8GB NAND Flash chip
• 256 MB RAM
• Apple 343S0479 1005 005BB
• M430 F2350 TI E03K C0GP G4
• SMSC 8710A-EZK B1023-A2 (10/100 Ethernet Transceiver)
• TXC MUGT 27.000
• TXCPCUM3 50.000
• Apple 338S0891

Packaged iOS Software

Lowtide is the application running on the AppleTV. It is essentially an updated "FrontRow" system that handles all user interaction, video playback, streaming, etc. It has been shown to run on other iOS hardware such as the iPod Touch.

Dock Connector

The Apple TV 2G has a predetermined spot that is apparently for a 30-pin dock connector. This is most probably here for Apple's in-house developer units.

The default Apple TV hardware does not allow you to use the HDMI port and the micro-USB port at the same time. Adding a dock to the spot will bypass this hardware restriction, allowing both hacking and viewing.

Soldering to the dock terminals on pins 2 and 3 failed to get analog audio out. It is not know if this is because of a hardware or software limitation. Sound was able to be produced out of the HDMI port but no sound came out of the dock pins corresponding to audio out on other iOS devices.

Specifications

Size: 23 mm (0.9 inches) (h), 98 mm (3.9 inches) (w), 98 mm (3.9 inches) (d)
Weight: 0.6 pounds
I/O: HDMI, Optical audio, 10/100 Mbps Ethernet, IR receiver, Micro-USB port
Storage Capacity: 8 Gigabytes (Not directly usable)

Useful Links

• Complete Proper Headers for OS 4.1
• Sample frappliance template
• Dustin Howett's beigelist
• iFixit Teardown
• How to save SHSH blob
• dyldcache listing

Jailbreak Status

PwnageTool 4.1 uses the limera1n exploit to jailbreak and auto-install SSH and AFC2. It also installs parts of Cydia (like apt-get), but a Cydia GUI remains to be developed and deployed. The assumption is that your home network is secure, but it is recommended that you change your root password anyways, which is "alpine" by default. About all you can do now is command line operations via ssh, until developers enable methods to use remotes.

greenp0ison leverages limera1n's exploit and RC5 is being prepared to have Apple TV 2G support. Preview screenshots have been posted by Chronic Dev showing altered menus and a software injector. [1]

Older Developments:

• SHAtter: pod2g's SHAtter exploit has been showcased by MuscleNerd and posixninja as capable of jailbreaking the Apple TV 2G, but this exploit will not be released for a while due to the release of limera1n's exploit. It is mentioned here mainly for posterity.

• limera1n: geohot released the limera1n exploit which is capable of jailbreaking the AppleTV, but as of right now it doesn't install AFC2 or SSH so it is of little practical use for any average Apple TV user, or even most Apple TV seasoned hackers. It never mounts or installs anything, ostensibly not making any changes at all to the Apple TV filesystem.

3rd Party Apple TV iOS Software

• Fire Core, a software development group who have released software for the Apple TV (1st Gen), is actively working on a product aTV Flash black and a corresponding SDK.