Difference between revisions of "ITunes Errors/Below 100"

From The iPhone Wiki
Jump to: navigation, search
(Error 31: cross ref)
Line 1: Line 1:
==Error 1==
+
=== Error 1 ===
 
* You are attempting to downgrade an iPhone from iOS 5 to iOS 4.x. To resolve, use either custom firmware created by PwnageTool/sn0wbreeze or use notcom's fixrecovery utility available on his site.
 
* On an iPhone 4 downgrading from iOS5 use the option in TinyUmbrella to allow a baseband "upgrade" to bypass the error and go back to basband 4.10.1
 
   
  +
* You are attempting to downgrade an iPhone from iOS 5 to iOS 4.x. To resolve, use either custom firmware created by [[PwnageTool]]/[[sn0wbreeze]] or use [[User:semaphore|notcom]]'s [[FixRecovery]] utility available on [http://thefirmwareumbrella.blogspot.com his site].
  +
* On an [[iPhone 4]] downgrading from iOS 5, use the option in [[TinyUmbrella]] to allow a baseband "upgrade" to bypass the error and go back to basband [[4.10.1]].
 
* Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
 
* Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
 
 
* The installed version of [[iTunes]] may also be too old. Update iTunes.
 
* The installed version of [[iTunes]] may also be too old. Update iTunes.
   
==Error 2==
+
=== Error 2 ===
ASR does not exist on ramdisk or is corrupt/not signed.
+
* ASR does not exist on ramdisk or is corrupt/not signed.
  +
* [[sn0wbreeze]] 1.6 Custom Firmware has a [[ASR]] patch problem. Use [[sn0wbreeze]] 1.7+ or [[PwnageTool]]. Device isn't bootable.
   
  +
=== Error 6 ===
Sn0wbreeze 1.6 Custom Firmware has a [[ASR]] patch problem. Use [[sn0wbreeze]] 1.7 or [[PwnageTool]]. Device isn't bootable.
 
 
==Error 6==
 
 
Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.
 
Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.
   
==Error 9==
+
=== Error 9 ===
 
* Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, it will fail to load asr and error 9 would occur during restore.
 
* Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, it will fail to load asr and error 9 would occur during restore.
   
==Error 10==
+
=== Error 10 ===
 
[[LLB]] is missing from the [[IPSW File Format|IPSW]]. The device cannot be booted up. The trick to skip the baseband update no longer works.
 
[[LLB]] is missing from the [[IPSW File Format|IPSW]]. The device cannot be booted up. The trick to skip the baseband update no longer works.
   
==Error 11==
+
=== Error 11 ===
*Removed bbfw file in the firmware folder of an unzipped [[IPSW File Format|IPSW]]. Can also be used to prevent a baseband update. The device is bootable, if you set the auto-boot to true or use TinyUmbrella and use "Kick Device out of Recovery".
+
* Removed [[Baseband|BB]]<nowiki />FW file in the firmware folder of an unzipped [[IPSW File Format|IPSW]]. Can also be used to prevent a baseband update. The device is bootable, if you set the auto-boot to true or use TinyUmbrella and use "Kick Device out of Recovery".
*You are trying to update to a custom firmware from Pwnage Tool 4.1+. You always have to go into DFU mode and restore from there.
+
* You are trying to update to a custom firmware from [[PwnageTool]] 4.1+. You always have to go into DFU mode and restore from there.
   
==Error 13==
+
=== Error 13 ===
Occurs when you want to install a beta firmware with [[iTunes]] for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
+
* Occurs when you want to install a beta firmware with [[iTunes]] for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
  +
* USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
  +
* The installed version of [[iTunes]] may also be too old. For firmwares 4.0 and higher you need iTunes 9.2 or higher. Update iTunes.
   
  +
=== Error 14 ===
Error 13 may also signify a USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
 
  +
* Custom firmware update fail ([[PwnageTool]] until 4.0.1). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. <sup>2</sup>
  +
* USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
  +
* You're trying to 'update' to a [[Beta Firmware|beta firmware]] instead of performing a restore. Device is still bootable if you kick it out of recovery mode.
   
  +
=== Error 17 ===
The installed version of [[iTunes]] may also be too old. For firmwares 4.0 and higher you need iTunes 9.2 or higher. Update iTunes.
 
 
==Error 14==
 
Custom firmware update fail ([[PwnageTool]] until 4.0.1). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. <sup>2</sup>
 
 
USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
 
 
You're trying to 'update' to a beta firmware instead of performing a restore. Device is still bootable if you kick it out of recovery mode.
 
 
==Error 17==
 
 
* Device failed to display the applelogo img3 which results in this error.
 
* Device failed to display the applelogo img3 which results in this error.
 
* One or more of the nand0/nor0 flash images were missing from the IPSW.
 
* One or more of the nand0/nor0 flash images were missing from the IPSW.
   
==Error 18==
+
=== Error 18 ===
 
This occurs when the media library on the device is corrupt and cannot be modified or updated.
 
This occurs when the media library on the device is corrupt and cannot be modified or updated.
   
 
Updating to the latest version of iTunes and then restoring should resolve this issue
 
Updating to the latest version of iTunes and then restoring should resolve this issue
   
==Error 20==
+
=== Error 20 ===
 
Error when downgrading 2.0 to 1.1.1.
 
Error when downgrading 2.0 to 1.1.1.
   
==Error 21==
+
== Error 21 ==
 
Custom firmware restore fail ([[PwnageTool]] since 4.1). You have to put your device into the DFU mode and not into recovery mode. Device won't boot correctly an stuck at the Apple logo after the error. Press and hold power and home button until it reboots.
 
Custom firmware restore fail ([[PwnageTool]] since 4.1). You have to put your device into the DFU mode and not into recovery mode. Device won't boot correctly an stuck at the Apple logo after the error. Press and hold power and home button until it reboots.
   
==Error 23==
+
== Error 23 ==
 
Cannot restore or update due to hardware problems.
 
Cannot restore or update due to hardware problems.
*In software you have to set default web browser.
+
* In software you have to set default web browser.
*In hardware, it's a communication problem. Check all connections, also try to change battery.
+
* In hardware, it's a communication problem. Check all connections, also try to change battery.
*faulty baseband flash or processor
+
* Baulty [[baseband]] flash or processor
*Happens frequently after water damage. Remove and clean motherboard.
+
* Happens frequently after water damage. Remove and clean motherboard.
   
==Error 26==
+
== Error 26 ==
 
* Values or variables in the options property list within the ramdisk are incorrect.
 
* Values or variables in the options property list within the ramdisk are incorrect.
 
* False version of the [[NOR]] flash firmware. Use the correct [[sn0wbreeze]] version.
 
* False version of the [[NOR]] flash firmware. Use the correct [[sn0wbreeze]] version.
   
==Error 28==
+
== Error 28 ==
Hardware error. Return your device to Apple if possible. The problem is a bad dock connector on the iPhone. Must change the connector.
+
* Hardware error. Return your device to Apple if possible. The problem is a bad dock connector on the iPhone. Must change the connector.
If you have tried almost everything, reset the logic board (leave uncharged for five days or remove battery for half an hour), then pwn and restore.
+
* If you have tried almost everything, reset the logic board (leave uncharged for five days or remove battery for half an hour), then pwn and restore. If this doesn't work, the "hard disk" of your device is damaged.
if this doesn't work, the "hard disk" of your iPhone is damaged.
 
   
==Error 29==
+
== Error 29 ==
 
See [http://discussions.apple.com/thread.jspa?threadID=2329795 Apple discussions thread] about this problem. You might need to change the battery.
 
See [http://discussions.apple.com/thread.jspa?threadID=2329795 Apple discussions thread] about this problem. You might need to change the battery.
   
==Error 31==
+
== Error 31 ==
see [[DFU Loop]]
+
{{main|DFU Loop}}
 
==Error 34==
 
Hard disk is run out of space when trying to download TV show's or movie's Please clear space and then continue downloading.
 
 
==Error 37==
 
[[N72ap|iPod touch 2G]] [[LLB]] patched with the [[0x24000 Segment Overflow]] was used on an [[N88ap|iPhone 3GS]] custom firmware. Known on damaged bundles from unofficial [[PwnageTool]] distributions or bundles.
 
   
  +
== Error 34 ==
[[Sn0wbreeze]] 2.0.1 bug, which was fixed in [[Sn0wbreeze]] 2.0.2.
 
  +
Hard disk is run out of space when trying to download. Clear space and then continue downloading.
   
  +
== Error 37 ==
recent [[Sn0wbreeze]] can cause this issue. Deselect all custom boot logos, recreate IPSW. If received on an [[N88ap|iPhone 3GS]], select "new boot-rom" and deselect all custom bootlogos, then recreate the IPSW.
 
  +
* [[N72ap|iPod touch 2G]] [[LLB]] patched with the [[0x24000 Segment Overflow]] was used on an [[N88ap|iPhone 3GS]] custom firmware. Known on damaged bundles from unofficial [[PwnageTool]] distributions or bundles.
  +
* [[sn0wbreeze]] 2.0.1 bug, which was fixed in 2.0.2.
  +
* Recent [[Sn0wbreeze]] can cause this issue. Deselect all custom boot logos, recreate IPSW. If received on an [[N88ap|iPhone 3GS]], select "new boot-rom" and deselect all custom bootlogos, then recreate the IPSW.
   
==Error 40==
+
== Error 40 ==
 
Hacktivation bug in [[Sn0wbreeze]] 2.0.1, which was fixed in [[Sn0wbreeze]] 2.0.2.
 
Hacktivation bug in [[Sn0wbreeze]] 2.0.1, which was fixed in [[Sn0wbreeze]] 2.0.2.
   
==Error 46==
+
== Error 46 ==
 
?
 
?

Revision as of 19:19, 27 August 2011

Error 1

  • You are attempting to downgrade an iPhone from iOS 5 to iOS 4.x. To resolve, use either custom firmware created by PwnageTool/sn0wbreeze or use notcom's FixRecovery utility available on his site.
  • On an iPhone 4 downgrading from iOS 5, use the option in TinyUmbrella to allow a baseband "upgrade" to bypass the error and go back to basband 4.10.1.
  • Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
  • The installed version of iTunes may also be too old. Update iTunes.

Error 2

  • ASR does not exist on ramdisk or is corrupt/not signed.
  • sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7+ or PwnageTool. Device isn't bootable.

Error 6

Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.

Error 9

  • Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, it will fail to load asr and error 9 would occur during restore.

Error 10

LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband update no longer works.

Error 11

  • Removed BBFW file in the firmware folder of an unzipped IPSW. Can also be used to prevent a baseband update. The device is bootable, if you set the auto-boot to true or use TinyUmbrella and use "Kick Device out of Recovery".
  • You are trying to update to a custom firmware from PwnageTool 4.1+. You always have to go into DFU mode and restore from there.

Error 13

  • Occurs when you want to install a beta firmware with iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
  • USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
  • The installed version of iTunes may also be too old. For firmwares 4.0 and higher you need iTunes 9.2 or higher. Update iTunes.

Error 14

  • Custom firmware update fail (PwnageTool until 4.0.1). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. 2
  • USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
  • You're trying to 'update' to a beta firmware instead of performing a restore. Device is still bootable if you kick it out of recovery mode.

Error 17

  • Device failed to display the applelogo img3 which results in this error.
  • One or more of the nand0/nor0 flash images were missing from the IPSW.

Error 18

This occurs when the media library on the device is corrupt and cannot be modified or updated.

Updating to the latest version of iTunes and then restoring should resolve this issue

Error 20

Error when downgrading 2.0 to 1.1.1.

Error 21

Custom firmware restore fail (PwnageTool since 4.1). You have to put your device into the DFU mode and not into recovery mode. Device won't boot correctly an stuck at the Apple logo after the error. Press and hold power and home button until it reboots.

Error 23

Cannot restore or update due to hardware problems.

  • In software you have to set default web browser.
  • In hardware, it's a communication problem. Check all connections, also try to change battery.
  • Baulty baseband flash or processor
  • Happens frequently after water damage. Remove and clean motherboard.

Error 26

  • Values or variables in the options property list within the ramdisk are incorrect.
  • False version of the NOR flash firmware. Use the correct sn0wbreeze version.

Error 28

  • Hardware error. Return your device to Apple if possible. The problem is a bad dock connector on the iPhone. Must change the connector.
  • If you have tried almost everything, reset the logic board (leave uncharged for five days or remove battery for half an hour), then pwn and restore. If this doesn't work, the "hard disk" of your device is damaged.

Error 29

See Apple discussions thread about this problem. You might need to change the battery.

Error 31

Main article: DFU Loop


Error 34

Hard disk is run out of space when trying to download. Clear space and then continue downloading.

Error 37

Error 40

Hacktivation bug in Sn0wbreeze 2.0.1, which was fixed in Sn0wbreeze 2.0.2.

Error 46

?