The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
iTunes Errors
Most of the errors can be found here
Here is a list of iTunes errors that could appear during a restore or a USB connection via iTunes:
Contents
Error 2
Sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7 or PwnageTool. Device isn't bootable.
Error 14
Custom Firmware update fail (PwnageTool). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. 2
Error 17
Custom Firmware update fail (sn0wbreeze). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. 2
Error 26
False version of the NOR flash firmware. Use the correct sn0wbreeze version.
Error 37
iPod touch 2G LLB patched with the 0x24000 Segment Overflow was used on an iPhone 3GS custom firmware. Known on damaged bundles from unofficial PwnageTool distributions or bundles.
Error 1004
Edited hosts file. iPhone 4 restore stops. Try to boot and set to "auto-boot true"
Error 1015
Baseband firmware on the IPSW is higher than the baseband firmware on the iPad/iPhone. 1
Error 1600
Custom firmware can't be restored on a device with DFU Mode. Use the Recovery Mode.
Error 1603
False kernelcache patch. Known on damaged bundles from unofficial PwnageTool distributions or bundles.
Error 1604
Device was not pwned (signature checks were not blocked). Custom firmware can't be restored.
Error 1611
iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode.
Error 1644
IPSW was moved during prepare with iTunes. Try it again and don't move the IPSW.
Error 2002
iTunes can't connect because another program is using it. For example during blackra1n jailbreak/reboot etc.
Error 3002
Update to an older firmware isn't working, because Apple is no longer handing out SHSHs for the device/firmware combination.
Error 3004
No internet connection during the firmware restore on an iPhone 4.
Error 3XXX
iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
0xE800006B
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again.
0xE8000065
sn0wbreeze custom cirmware error on USB connection. Unplug the device, reboot it, and plug it in again.
This device isn't eligible for the request build
Apple doesn't sign the firmware anymore.
1 Use iRecovery or redsn0w Lite and enter "setenv auto-boot true", "saveenv", "reboot" to boot.
2 Device isn't bootable, but a custom firmware can be restored if it has a jailbreak and the requirements.