BBUpdaterExtreme

This is the tool the 3G ramdisk uses to upgrade the baseband

Commands

• queryversion

Output

Disabling thermal Notifications...OK
Disabling sleep...OK
Powering radio on through AppleBaseband
Doing a hardware reset through AppleBaseband
Opening device path /dev/cu.debug, using initial baud 115200
Pinging modem...Ping timed out, trying again, 9 tries left
Pinging modem...OK
                 Firmware Version: ICE2-01.45.00
                EEP Version: EEP_VERSION:526
                EEP Revision: EEP_REVISION:0
               Boot Loader Version: ICE2_BOOT_05.08_G2M3S2
                FLS/EEP Mismatch: Match
Doing a hardware reset through AppleBaseband
Configuring Hardware Mux...OK
-------------------------------------------------------------------------------
 BEGINNING BOOT
-------------------------------------------------------------------------------
Sending boot code...OK
Automagic-ing firmware from path ICE2_01.45.00.fls...
        - No compatible firmware files were found in ICE2_01 .45.00.fls
Automagic-ing firmware from path ICE2_01.45.00.fls -- All OK
!!! Exception at :0:
        - BBUReturnAborted(8)/16: Automagic failed and can not perform update
Re-enabling thermal Notifications...OK
Re-enabling sleep...OK

This software article is a "stub", an incomplete page. Please add more content to this article and remove this tag.