|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Difference between revisions of "BBUpdaterExtreme"
(New page: This is the tool the 3G ramdisk uses to upgrade the baseband ==Output== Disabling thermal Notifications...OK Disabling sleep...OK Powering radio on through AppleBaseband Doing a hardware ...) |
|||
| Line 2: | Line 2: | ||
==Output== |
==Output== |
||
| − | Disabling thermal Notifications...OK |
+ | Disabling thermal Notifications...OK |
| − | Disabling sleep...OK |
+ | Disabling sleep...OK |
| − | Powering radio on through AppleBaseband |
+ | Powering radio on through AppleBaseband |
| − | Doing a hardware reset through AppleBaseband |
+ | Doing a hardware reset through AppleBaseband |
| − | Opening device path /dev/cu.debug, using initial baud 115200 |
+ | Opening device path /dev/cu.debug, using initial baud 115200 |
| − | Pinging modem...Ping timed out, trying again, 9 tries left |
+ | Pinging modem...Ping timed out, trying again, 9 tries left |
| − | Pinging modem...OK |
+ | Pinging modem...OK |
| − | Firmware Version: ICE2-01.45.00 |
+ | Firmware Version: ICE2-01.45.00 |
| − | EEP Version: EEP_VERSION:526 |
+ | EEP Version: EEP_VERSION:526 |
| − | EEP Revision: EEP_REVISION:0 |
+ | EEP Revision: EEP_REVISION:0 |
Boot Loader Version: ICE2_BOOT_05.08_G2M3S2 |
Boot Loader Version: ICE2_BOOT_05.08_G2M3S2 |
||
| − | FLS/EEP Mismatch: Match |
+ | FLS/EEP Mismatch: Match |
| − | Doing a hardware reset through AppleBaseband |
+ | Doing a hardware reset through AppleBaseband |
| − | Configuring Hardware Mux...OK |
+ | Configuring Hardware Mux...OK |
| − | ------------------------------------------------------------------------------- |
+ | ------------------------------------------------------------------------------- |
| − | + | BEGINNING BOOT |
|
| − | ------------------------------------------------------------------------------- |
+ | ------------------------------------------------------------------------------- |
| − | Sending boot code...OK |
+ | Sending boot code...OK |
| − | Automagic-ing firmware from path ICE2_01.45.00.fls... |
+ | Automagic-ing firmware from path ICE2_01.45.00.fls... |
| − | - No compatible firmware files were found in ICE2_01.45.00.fls |
+ | - No compatible firmware files were found in ICE2_01 .45.00.fls |
| − | Automagic-ing firmware from path ICE2_01.45.00.fls -- All OK |
+ | Automagic-ing firmware from path ICE2_01.45.00.fls -- All OK |
| − | !!! Exception at :0: |
+ | !!! Exception at :0: |
| − | - BBUReturnAborted(8)/16: Automagic failed and can not perform update |
+ | - BBUReturnAborted(8)/16: Automagic failed and can not perform update |
| − | Re-enabling thermal Notifications...OK |
+ | Re-enabling thermal Notifications...OK |
| − | Re-enabling sleep...OK |
+ | Re-enabling sleep...OK |
Revision as of 11:39, 27 July 2008
This is the tool the 3G ramdisk uses to upgrade the baseband
Output
Disabling thermal Notifications...OK
Disabling sleep...OK
Powering radio on through AppleBaseband
Doing a hardware reset through AppleBaseband
Opening device path /dev/cu.debug, using initial baud 115200
Pinging modem...Ping timed out, trying again, 9 tries left
Pinging modem...OK
Firmware Version: ICE2-01.45.00
EEP Version: EEP_VERSION:526
EEP Revision: EEP_REVISION:0
Boot Loader Version: ICE2_BOOT_05.08_G2M3S2
FLS/EEP Mismatch: Match
Doing a hardware reset through AppleBaseband
Configuring Hardware Mux...OK
-------------------------------------------------------------------------------
BEGINNING BOOT
-------------------------------------------------------------------------------
Sending boot code...OK
Automagic-ing firmware from path ICE2_01.45.00.fls...
- No compatible firmware files were found in ICE2_01 .45.00.fls
Automagic-ing firmware from path ICE2_01.45.00.fls -- All OK
!!! Exception at :0:
- BBUReturnAborted(8)/16: Automagic failed and can not perform update
Re-enabling thermal Notifications...OK
Re-enabling sleep...OK
